Cold vulcanizing is to use vulcanized material such as patches and strips to repair a conveyor belt. Cold vulcanization does not use a press but uses a bonding agent like cold adhesive, which causes a chemical reaction to splice the two belt ends together. Cold vulcanization means that you can finish your vulcanization at ambient temperature. You can often see it on conveyor belt jointing, pulley lagging, conveyor belt repair. Different from hot vulcanization, cold vulcanization allows your conveyor only 2-3 hours of downtime, which greatly reduces the maintenance cost and improves the production efficiency. In conveyor maintenance, cold vulcanization is a perfect solution for emergency conveyor belt repair, it suitable for conveyor belt repair includes longitudinal breaches, damaged topcoats, damaged edges of the belt, or bonding rubber to steel surface too.

During the bulk material conveying of the belt, various damages may occur due to material dumping, falls, such as longitudinal tearing, edge damage, gouged, deep punctured, and so on. All the damages can be repaired by the cold vulcanization solution, it is the most efficient repair method so far.

• Using our liquid rubber available in variety of hardness to repair damaged vessel lining, gaskets, conveyor belts and other parts.

• Can be applied as a coating and casting by high-build application.

A method to bond two surfaces or objects together without the use of heat.