Description
WRAP SEAL ULTRA QUICK REPAIR KIT FOR ACTIVE PIPE LEAKS
FEATURES:
- Repairs under active leak up to 150 psi (11 kg/cm2) pressure
- No shutdown required
- Works on any metal or non-metal pipes
- Applicable to pipes up to 18″ (457 mm) diameter
- Repairs leak in 15 minutes
- Withstand pressure up to 500 psi (35 kg/cm2)
- Withstand temperature up to 200 °C (392 °F)
- Safe for drinking water and resistant to most chemicals
- Ideal for pipeline reinforcement
APPLICABLE MATERIAL:
- Steel
- Copper
- Aluminium
- Galvanized steel
- PVC
- CPVC
- Stainless steel
- Polyethylene
- Polypropylene
- Cast-iron
- Concrete
- FRP/GRE
CHEMICAL RESISTANCE:
- Oil
- Water (drinking water, wastewater, steam)
- Solvents (acetone, toluene, MEK, ethyl alcohol)
- Mild acids (hydrochloric acid, sulfuric acid) and alkalis
- Chemical (ethylene glycol, xylenes, ammonia)
- Hydrocarbons
- Bases
- Slurries
- Fuels (petroleum, diesels, gasoline)
- Gases (LNG, LPG)
- Organic salts
WORKING TIME (FIBERGLASS TAPE):
CURING TIME:
- 1 minute at 30 °C (86 °F)
- 30 minutes at 30 °C (86 °F)
- Heat may be applied to decrease curing time
- Unopened foil pouch may be immerse in cold water prior to repair to add working and curing time.
APPLICATION:
-
- Pipe repairs
- Active pipe leaks
- Sealing joints
- Hazardous material spill control
- Reinforce thinning walls
- Repairs in hard to reach areas
- Underwater repairs
OPERATING TEMPERATURE:
OPERATING PRESSURE:
-
- -50 °C (-58 °F) to 200 °C (392 °F)
- Recommended for pressure up to 500 psi (35 kg/cm2)
- (Result vary depending on pipe size, type of pipe, hole size, pipe content and method of application)
APPLICABLE INDUSTRIES:
Building & Facilities
Electronics
Industrial Processing
Irrigation
Oil & Gas
Chemical
Manufacturing Plants
Marine
Military
Offshore
Food Processing
Petrochemical
Pharmaceutical
Power Generation
Pulp & Paper
Wastewater
Water Distribution
TECHNICAL DATA:
| Tensile strength | : | 3920 psi (276 kg/cm2) |
| Bond strength | : | 230 psi (16 kg/cm2) |
| Tensile elongation | : | 1.2 % ± 0.7 % |
| Compression strength | : | 13750 ± 530 psi (967 ± 37 kg/cm2) |
| Yield strength | : | 2260 psi (159 kg/cm2) |
| Cured hardness | : | 82 Shore D |
| Dielectric strength | : | 400 Volts/mil |
| Pipe size | Number of rolls / size required | ||
| 50 psi (4 kg/cm2) 10 plys | 150 psi (11 kg/cm2) 15 plys | 400 psi (28 kg/cm2) 20 plys | |
| ½” (15mm) | 1 A | 1 A | 1 A |
| ¾” (20mm) | 1 A | 1 A | 1 A |
| 1″ (25mm) | 1 A | 1 A | 2 A |
| 1¼” (32mm) | 1 A | 2 A | 3 A |
| 1½” (40mm) | 2 A | 2 A | 1 B |
| 2″ (50mm) | 1 B | 1 B | 1 B |
| 2½” (65mm) | 1 B | 1 B | 2 C |
| 3″ (80mm) | 1 B | 2 C | 2 C |
| 4″ (100mm) | 1 B | 2 C | 3 C |
| Pipe size | Number of rolls / size required | ||
| 50 psi (4 kg/cm2) 10 plys | 150 psi (11 kg/cm2) 15 plys | 400 psi (28 kg/cm2) 20 plys | |
| 5″ (125mm) | 2 C | 2 C | 3 C |
| 6″ (150mm) | 2 C | 2 C | 4 C |
| 8″ (200mm) | 2 C | 3 C | 5 C |
| 10″ (250mm) | 3 C | 4 C | 6 C |
| 12″ (300mm) | 4 C | 5 C | 8 C |
| 14″ (350mm) | 4 C | 6 C | 8 C |
| 16″ (400mm) | 5 C | 7 C | 9 C |
| 18″ (450mm) | 5 C | 8 C | 9 C |
| > 18″ (450mm) | Contact SealXpert for recommendations | ||
| Roll size | A (2″ x 6′) (50mm x 1.8m) | B (2″ x 12′) (50mm x 3.6m) | B (3″ x 9′) (75mm x 2.7m) | C (4″ x 12′) (100mm x 3.6m) |
WRAP SEAL ULTRA ACTIVE LEAK REPAIR PROCEDURE:
1
2
3
Minimize the flow rate and reduce system pressure
Roughen the area to be repaired
Knead the Seal Stic
4
5
6
Place the Seal Stic away from the leak location
Start wrapping the SealXpert Ultra Sealing Tape a few distances away from the leak location
Continue to wrap SealXpert Ultra Sealing Tape onto pipe while pushing the Seal Stic onto leak location
7
8
9
Immerse Wrap Seal Fiberglass Tape into water
Wrap the Wrap Seal Fiberglass Tape above the repair tape as tightly and evenly as possible, using the entire roll
Discard the plastic tube at the end of the roll
7
Wet gloves in water and quickly compress the bubbling resins back into the fiberglass wrap until all bubbling has stopped. Repair completed with smooth and hard ivory appearance
Reviews
There are no reviews yet.