Description
SEALXPERT STAINLESS STEEL PIPE CLIP
FEATURES:
- Makes pipe clips from 2” (50 mm) to 382” (9700 mm)
- Easy to use
- Versatile and fast to install
- No special tool is required
- Stainless steel 304 material
- Free to cut to any diameters required
APPLICATION:
-
- For securing, mounting, strapping, clamping and positioning
- Can be used for all conventional clamping jobs
- Make any sizes from 2” (50 mm) diameter to 382” (9703 mm) diameter within seconds
APPLICABLE INDUSTRIES:
Building & Facilities
Electronics
Industrial Processing
Irrigation
Oil & Gas
Chemical
Manufacturing Plants
Marine
Military
Offshore
Food Processing
Petrochemical
Pharmaceutical
Power Generation
Pulp & Paper
Wastewater
Water Distribution
TECHNICAL DATA:
| Material grade | : | All stainless steel 304 |
| Band length | : | 100’ (30.5 m) |
| Band width | : | 0.5” (12.7 mm) |
| Head | : | 0.3” (7.9 mm) slotted hex head screw |
| Closure components | : | 0.6” (14.2 mm) wide fastener & screw housing assembly |
SEALXPERT STAINLESS STEEL PIPE CLIP INSTALLATION PROCEDURE:
1
Determine actual band length in one of two ways:
- (a) If diameter is known, refer to band length table below
- (b) If diameter is not known, measure circumference with string, twine, etc. and subtract 4” (to allow for length of fastener ends) to determine actual band length.
| Pipe Diameter | Length to cut on Mark | Pipe Diameter | Length to cut on Mark | Pipe Diameter | Length to cut on Mark |
|---|---|---|---|---|---|
| 2” (50.8 mm) | 2-1/2” (63.5 mm) | 22” (558.8 mm) | 65-7/8” (1673.2 mm) | 60” (1524.0 mm) | 184-13/16” (4694.2 mm) |
| 3’ (76.2 mm) | 5-1/16” (128.6 mm) | 24” (609.6 mm) | 72-1/8” (1832.0 mm) | 62” (1574.8 mm) | 191-1/8” (4854.6 mm) |
| 4” (101.6 mm) | 8-7/8” (225.4 mm) | 26” (660.4 mm) | 77-1/4” (1962.2 mm) | 64” (1625.6 mm) | 197-7/16” (5014.9 mm) |
| 5” (127.0 mm) | 11-7/16” (290.5 mm) | 28” (711.2 mm) | 83-5/8” (2124.1 mm) | 66” (1676.4 mm) | 203-5/8” (5172.1 mm) |
| 6’ (152.4 mm) | 15-3/16” (385.8 mm) | 30” (762.0 mm) | 89-7/8” (2282.8 mm) | 68” (1727.2 mm) | 209-15/16” (5332.4 mm) |
| 7” (177.8 mm) | 17-3/4” (450.9 mm) | 32” (812.8 mm) | 96-3/8” (2447.9 mm) | 70” (1778.0 mm) | 216-1/4” (5492.8 mm) |
| 8” (203.2 mm) | 21-1/2” (546.1 mm) | 34” (863.6 mm) | 102-5/8” (2606.7 mm) | 72” (1828.8 mm) | 222-9/16” (5653.1 mm) |
| 9” (228.6 mm) | 24-1/8” (612.8 mm) | 36” (914.4 mm) | 108-7/8” (2765.4 mm) | 74” (1879.6 mm) | 228-7/8” (5813.4 mm) |
| 10” (254.0 mm) | 27-7/8” (708.0 mm) | 38” (965.2 mm) | 115-1/4” (2927.4 mm) | 76” (1930.4 mm) | 235-13/16” (5989.6 mm) |
| 11” (279.4 mm) | 30-3/8” (771.5 mm) | 40” (1016.0 mm) | 121-9/16” (3087.7 mm) | 78” (1981.2 mm) | 241-1/2” (6134.1 mm) |
| 12” (304.8 mm) | 34-3/16” (868.4 mm) | 42” (1066.8 mm) | 128” (3251.2 mm) | 80” (2032.0 mm) | 247-13/16” (6294.4 mm) |
| 13” (330.2 mm) | 36-3/4” (933.5 mm) | 44” (1117.6 mm) | 134-5/16” (3411.5 mm) | 82” (2082.8 mm) | 254-1/8” (6454.8 mm) |
| 14” (355.6 mm) | 40-1/2” (1028.7 mm) | 46” (1168.4 mm) | 140-5/8” (3571.9 mm) | 84” (2133.6 mm) | 260-7/16” (6615.1 mm) |
| 15” (381.0 mm) | 43-1/16” (1093.8 mm) | 48” (1219.2 mm) | 146-15/16” (3732.2 mm) | 86” (2184.4 mm) | 266-5/8” (6772.3 mm) |
| 16” (406.4 mm) | 46-7/8” (1190.6 mm) | 50” (1270.0 mm) | 153-1/4” (3892.6 mm) | 88” (2235.2 mm) | 272-15/16” (6932.6 mm) |
| 18” (457.2 mm) | 53-1/8” (1349.4 mm) | 54” (1371.6 mm) | 165-7/8” (4213.2 mm) | 92” (2336.8 mm) | 285-9/16” (7253.3 mm) |
| 19” (482.6 mm) | 55-3/4” (1416.1 mm) | 56” (1422.4 mm) | 172-3/16” (4373.6 mm) | 94” (2387.6 mm) | 291-7/8” (7413.6 mm) |
| 20” (508.0 mm) | 59-1/2” (1511.3 mm) | 558” (1473.2 mm) | 178-1/2” (4533.9 mm) | 96” (2438.4 mm) | 298-3/16” (7574.0 mm) |
2
3
Measure band to proper length and cut through center of nearest round hole with shears, snips, hacksaw, etc.
4
5
Complete the clamp by diagonally inserting the ends of the engaged fastener assembly to the band through the tops of the square holes at each end of the band
Reviews
There are no reviews yet.